ROOF RACK (2x Tie-Down Plates)
by: Chief Products
Out of Stock Pre-Order $109.99 AUD
Notify Me
Give us a few of your details and we'll notify you when this product is available.
Success!
You'll be notified when the product becomes available again.
Oops!
Something went wrong. Please try again later.
![](http://www.chiefproducts.com.au/cdn/shop/t/199/assets/btn-spinner.gif?v=168037938612455090981695186898)
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
Chief Products ROOF RACK (Tie-Down Plates) are engineered to provide multiple ways to secure gear and accessories to your roof rack. They clamp securely between our Planks in a way that allows them to easily locate anywhere along the entire length of the Planks.
Manufactured from Aircraft-Grade Aluminium Alloys and High-Strength Steel, they're extremely strong to meet the high demands they're sure to encounter. The centre acts as an easy tie-down location, while the slots on either end hold captive T-Nuts (M6, M8 & M10) that can be used to easily secure any accessories you need. Best of all, when clamped in place they sit completely flush, providing a completely smooth top surface for your roof rack.
115mm | TIE-DOWN PLATE LENGTH (4.53 inches) |
110mm | TIE-DOWN PLATE WIDTH (4.33 inches) |
0.50kg | INSTALLED WEIGHT |
TIE-DOWN STRAP HOOK on CENTRE SECTION |
ROPE pass through CENTRE SECTION |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (upper location between plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M8 BOLT into M8 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M10 BOLT into M10 T-NUT (HEAVY DUTY --> lower location below both plates; includes room for bolt pass through) |
(2) T-NUT SLOTS --> M12 CARRIAGE BOLT into SQUARE HOLE (Lower Plate) (HEAVY DUTY --> up through lower plate) |
(2) T-NUT SLOTS --> M8, M10 & M12 BOLT pass through both PLATES (nut below lower plate) |
(2) M8 MOUNTING BOLTS --> REPLACE with LONGER MOUNTING BOLT (using weld nut on lower plate) |
Category: AM2G EXTRA J150 J200 J300 MULTI-VEHICLE P375 P703 PRODUCT ROOF UP-UR VEHICLE (Accessory) WL74 WL75
Share:
- SStorm S.Verified BuyerI recommend this productRated 5 out of 5 stars3 years agoEasy to Install and Highly Configurable
The tie-downs are amazing. They go on in a matter of seconds and are able to slide like a train on the planks tracks to wherever you need them to be. super easy to do with one person and they are very strong with a metal plate support bracket underneath.
Was this helpful?
Related Items
ROOF RACK (2x Planks) [1146mm]
Out of Stock Pre-Order $322.99 AUD
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
Chief Products ROOF RACK (Planks) are a key component of our Modular Roof Rack System. Our unique modular approach, provides customers with the ability to bolt Planks and Half-Planks to their Mounting Rails in numerous positions and combinations. Customers can build the roof rack they want, and easily reconfigure it (add-remove-reposition components) whenever their needs change. Best of all, each Plank provides two channels for captive T-Nuts. This feature allows you to easily bolt accessories to the Plank at any point along the entire length.
We provide (2) Planks; each measuring 1146mm (45.12") long, 156mm (6.14") wide, and an amazing 25mm (0.98") thin. We utilise a proprietary Aircraft-Grade Aluminium Alloy and an advanced Extrusion Manufacturing Process that allows us to deliver Planks with an extremely high strength-to-weight ratio.
1146mm | PLANK LENGTH (45.12 inches) |
156mm | PLANK WIDTH (6.14 inches) |
25mm | PLANK THICKNESS (0.98 inches) |
2.52kg | INSTALLED WEIGHT --> 1 Plank |
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
ROOF RACK (Roof Top Tent KIT)
Out of Stock Pre-Order $49.99 AUD $76.99 AUD
Chief Products ROOF RACK (Roof Top Tent KIT) is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks. For most customers, this KIT isn't required when using Chief Products ROOF RACK (2x Half-Planks).
Chief Products ROOF RACK (Roof Top Tent KIT) is designed to make installation of your Roof Top Tent super easy. The KIT includes (4) Roof Top Tent Brackets made from 5mm steel. These brackets, along with the mounting hardware from your RTT, enable you to easily and securely clamp your Roof Top Tent onto our Planks. For most customers, this KIT isn't required when using Chief Products ROOF RACK (2x Half-Planks).
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
ROOF RACK (4x Plank End-Caps)
Out of Stock Pre-Order $48.99 AUD
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Chief Products ROOF RACK (Plank End-Caps) provide a nice finish to the ends of our Planks. Engineered to provide improved aerodynamics, reduced wind noise, and protection from debris entering the ends of your Planks. Perfect for customers not installing a ROOF RACK (Platform Frame). We provide (4) Plank End-Caps; enough for (2) Planks. They bolt on easily and feature (7) slots.
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.
Keep me updated
Give us a few of your details and we'll keep you updated on this product.
Notify Me
Give us a few of your details and we'll notify you when this product is available.