WK2 FENDER FLARES

WK2 OFF-ROAD REAR BUMPER $0.00 AUD

WK2 OFF-ROAD REAR BUMPER
WK2 OFF-ROAD REAR BUMPER
WK2 OFF-ROAD REAR BUMPER

WK2 OFF-ROAD REAR BUMPER

In Development

CONCEPT

Deliver an industry leading off-road rear bumper for the WK2 (2011-2020 Jeep Grand Cherokee) that provides full off-road protection with an integrated design.

CONCEPT

Deliver an industry leading off-road rear bumper for the WK2 (2011-2020 Jeep Grand Cherokee) that provides full off-road protection with an integrated design.

FEATURES

An integrated design that compliments the rear styling of the WK2.
Industry leading off-road protection.
Excellent departure angle.
Provide integrated, easy to use rear recovery points.
Ability to carry accessories, (spare tyre, jerry cans, etc.).
Ability to integrate with the Mopar tow bar, (or act as a replacement).
Ability to integrate with long range fuel tanks.
Provide protection for towing plugs, etc.
Integrates with rear opening tailgate.
Allows unobstructed view through reverse camera.
Easy to install.
Compatible with all WK2 safety systems, (Parksense Rear Park Assist, Blind Spot Monitoring, Rear Cross Path Detection, etc.).

* Some features may not appear in the final production version.

TARGET RELEASE DATE

DESIGN & ENGINEERING --> ON HOLD

FIRST PROTOTYPE --> TBD

FINISHED PRODUCT --> TBD

Initial design and engineering for this product has commenced, but work is currently on hold. We're committed to the project, but low consumer demand has placed it behind other projects.

PROJECT STATUS

WK2 BASE STATION $0.00 AUD

WK2 BASE STATION
WK2 BASE STATION
WK2 BASE STATION

WK2 BASE STATION

In Development

CONCEPT

Deliver an industry leading underfloor solution for the WK2 (2011-2019 Jeep Grand Cherokee) that repurposes the spare tyre area to provide a collection of key features for those that love Overlanding in their WK2.

CONCEPT

FEATURES

Storage compartments.
Option for power system to power for fridges, computers, drones, electronics, etc. System includes lithium battery, Inverter, alternator charging, solar charging, etc.
Option for removal power system, (can be detached for use away from the vehicle).
Option for air compressor, (inflate tyres, run air tools, etc.).
Option for pressurised 20L water tank.
Integrated control panel with plugs for power, air and water.
New floor panel that can be opened for underfloor access without needing to remove gear in the back of your WK2.
Easy to install.

* Some features may not appear in the final production version.

TARGET RELEASE DATE

DESIGN & ENGINEERING --> ON HOLD

FIRST PROTOTYPE --> TBD

FINISHED PRODUCT --> TBD

Initial design and engineering for this product has commenced, but work is currently on hold until other projects are completed.

PROJECT STATUS

WK2 TRU-LIFT $0.00 AUD

WK2 TRU-LIFT
WK2 TRU-LIFT
WK2 TRU-LIFT

WK2 TRU-LIFT

In Development

CONCEPT

Deliver an industry leading lift kit for the WK2 (2011-2020 Jeep Grand Cherokee) that provides all of the highly desired features WK2 owners want but are not currently available in the marketplace.

CONCEPT

Deliver an industry leading lift kit for the WK2 (2011-2020 Jeep Grand Cherokee) that provides all of the highly desired features WK2 owners want but are not currently available in the marketplace.

FEATURES

Provides lift options greater than 3” (77mm).
Provide 2” (50mm) kit for regions with legal restrictions, (Australia, etc.).
Available for Coil Sprung or Quadra-Lift equipped WK2s.
Doesn’t limit Quadra-Lift functionality.
Compatible with all electronic systems, (no error codes).
Ability to run larger tyres.
Provides increased wheel travel.

* Some features may not appear in the final production version.

SURVEY

We’ve received 700+ responses to our survey. Based on the response we’ve decided to move forward with this project. Please feel free to complete the survey and add your voice to the chorus of WK2 owners interested in this project.

TARGET RELEASE DATE

DESIGN & ENGINEERING --> ON HOLD

FIRST PROTOTYPE --> TBD

FINISHED PRODUCT --> TBD

Initial design and engineering for this product has commenced, but work is currently on hold until other projects are completed.

PROJECT STATUS

FAIRLEAD SURROUND $0.00 AUD

FAIRLEAD SURROUND
FAIRLEAD SURROUND
FAIRLEAD SURROUND

FAIRLEAD SURROUND

In Development

CONCEPT

Deliver a product that mounts around our Hawse Winch Fairlead, providing increased aesthetics and a mounting place for additional accessories.

CONCEPT

Deliver a product that mounts around our Hawse Winch Fairlead, providing increased aesthetics and a mounting place for additional accessories.

FEATURES

Integrates perfectly with our Hawse Winch Fairlead.
Provides a secure place to mount additional accessories, (license plate, off-road lights, etc.).
Provides improved aesthetics.
Makes bumper trimming for Hawse Winch Fairlead much easier.
Hides rough or uneven edges created when trimming for Hawse Winch Fairlead access.
Easy bolt-on installation, (no cutting or drilling required).

* Some features may not appear in the final production version.

TARGET RELEASE DATE

DESIGN & ENGINEERING --> IN PROGRESS

FIRST PROTOTYPE --> LATE 2019

FINISHED PRODUCT --> EARLY 2020

Initial design and engineering for this product has been completed. We expect first prototypes to arrive DEC 2019, so we can begin real-world testing. Design and engineering work will then focus on application to all WK2 models, ease-of-installation and preparation for volume manufacturing. If all goes well, we'll begin manufacturing and deliver the finished product EARLY 2020.

PROJECT STATUS

FAIRLEAD LIGHT MOUNT $0.00 AUD

FAIRLEAD LIGHT MOUNT
FAIRLEAD LIGHT MOUNT
FAIRLEAD LIGHT MOUNT

FAIRLEAD LIGHT MOUNT

In Development

CONCEPT

Deliver a product that mounts around our WK2 Fairlead Surround, providing increased aesthetics and a mounting place for additional accessories.

CONCEPT

Deliver a product that mounts around our WK2 Fairlead Surround, providing increased aesthetics and a mounting place for additional accessories.

FEATURES

Integrates perfectly with our WK2 Fairlead Surround.
Provides a high-strength location to mount small off-road lights.
Easy bolt-on installation, (no cutting or drilling required).

* Some features may not appear in the final production version.

TARGET RELEASE DATE

DESIGN & ENGINEERING --> IN PROGRESS

FIRST PROTOTYPE --> LATE 2019

FINISHED PRODUCT --> EARLY 2020

Initial design and engineering for this product has been completed. We expect first prototypes to arrive DEC 2019, so we can begin real-world testing. Design and engineering work will then focus on application to all WK2 models, ease-of-installation and preparation for volume manufacturing. If all goes well, we'll begin manufacturing and deliver the finished product EARLY 2020.

PROJECT STATUS

NUMBER PLATE MOUNT (Flip Action) $0.00 AUD

NUMBER PLATE MOUNT (Flip Action)
NUMBER PLATE MOUNT (Flip Action)
NUMBER PLATE MOUNT (Flip Action)

NUMBER PLATE MOUNT (Flip Action)

In Development

CONCEPT

Deliver an industry leading Number Plate Mount with flip action, that can flip up out the way for Hawse Fairlead access, and then flip down to cover/hide Hawse Fairlead.

CONCEPT

Deliver an industry leading Number Plate Mount with flip action, that can flip up out the way for Hawse Fairlead access, and then flip down to cover/hide Hawse Fairlead.

FEATURES

Smooth spring loaded movement that provides flip up and flip down action.
Delivers (2) mounting options for integration with most Hawse Fairleads, or specific integration with our WK2 Fairlead Surround.
Provides mounting options for various sized license plates.
Complies with global legal license plate requirements.
Easy bolt-on installation, (no cutting or drilling required).

* Some features may not appear in the final production version.

TARGET RELEASE DATE

DESIGN & ENGINEERING --> IN PROGRESS

FIRST PROTOTYPE --> LATE 2019

FINISHED PRODUCT --> EARLY 2020

Initial design and engineering for this product has been completed. We expect first prototypes to arrive DEC 2019, so we can begin real-world testing. Design and engineering work will then focus on application to all WK2 models, ease-of-installation and preparation for volume manufacturing. If all goes well, we'll begin manufacturing and deliver the finished product EARLY 2020.

PROJECT STATUS

ROOF RACK (2x Anchor Points) $0.00 AUD

ROOF RACK (2x Anchor Points)

ROOF RACK (2x Anchor Points)

In Development

COMING SOON

ROOF RACK (2x Anchor Points)

Roof Rack (Anchor Point)

T-SHIRT (Man + Machine + Nature) $0.00 AUD

T-SHIRT (Man + Machine + Nature)

T-SHIRT (Man + Machine + Nature)

In Development

A standard-fit classic tee printed with Chief Products logo & original artwork, made from heavy duty cotton.

Designed and field tested by Chief Products Basecamp Team - Mudgeeraba, Australia.

PROJECT STATUS

WK2 POSTER (Drink the Wild Air) $0.00 AUD

WK2 POSTER (Drink the Wild Air)

WK2 POSTER (Drink the Wild Air)

In Development

Original artwork posters printed on enhanced matte paper using genuine archival inks.

PROJECT STATUS

WK2 POSTER (Take The Long Way Home) $0.00 AUD

WK2 POSTER (Take The Long Way Home)

WK2 POSTER (Take The Long Way Home)

In Development

Original artwork posters printed on enhanced matte paper using genuine archival inks.

PROJECT STATUS

WK2 POSTER (Dark Forest) $0.00 AUD

WK2 POSTER (Dark Forest)

WK2 POSTER (Dark Forest)

In Development

Original artwork posters printed on enhanced matte paper using genuine archival inks.

Pulling out of camp early one foggy morning the Chief Products WK2 rolled down crooked forest trails at Swan Gully 4WD Park - Queensland, Australia. Captured by photographer Daniel Snare and carefully designed for print by Bill Mackin this poster is ready to frame, hang and remind you of what unexplored beauty’s remain in the great outdoors.

Printed on high quality Matte Art Paper (also known as Enhanced Matte Paper) by Epson, it has a flat matte finish and a bright white base that accentuates highlights, tones and enables images with sharp detail, high colour saturation with a high gamut. This approximate lifespan of this paper is 50 years.

SPECIFICATIONS

Matte Art Paper (MEP)

189gsm Weight

250um Paper Thickness

Smooth Feel

Matte Finish

OPTIONS

A1 (594 x 840mm).

A2 (420 x 594mm).

PROJECT STATUS