WK2 ROOF RACK (Aero)
by: Chief Products
$179.99 AUD
Chief Products WK2 ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack (diverting high-velocity air up and over your roof rack).
Chief Products WK2 ROOF RACK (Aero) delivers enhanced styling and aerodynamic performance. Engineered to reduce wind noise by restricting the amount of high-velocity air flowing through the confined space underneath your roof rack (diverting high-velocity air up and over your roof rack).
Ideal for customers wanting optimum aerodynamic performance in high-wind conditions, cross-wind conditions, or regular high-speed driving. WK2 ROOF RACK (Aero) can be used as a replacement for the ROOF RACK (Stealth Air Dam) or in combination.
* ROOF RACK (Stealth Air Dam) provides excellent performance for most customers and is included with every set of Chief Products Mounting Rails.
| 1.2kg | INSTALLED WEIGHT |
- DDLVerified ReviewerRated 5 out of 5 stars12 minutes agoPerfect
Bought the roof rack a few years back. I would remove the planks for everyday driving because the noise was annoying and I couldn't get the plank configuration right (especially with the sunroof vented and at highway speeds). I saw this and wanted to try it because not having the planks on permanently was very inconvenient.
The aero was a game changer.
There is no noise, just like when I have the planks off. (Note: You will have noise when the roof rack is loaded with gear)
I highly recommend this.
- HAHOSAM A.Verified BuyerRated 5 out of 5 stars3 months agoSilent Roof Rack Solution
With this addition to WK2 Roof Rack, the wind noise is gone even at high speed. It allows full functionality for sunroof operation and doesn't block the view.
In addition, it adds a nice look for the vehicle.
I like it and recommend it.
- MTMark T.Verified ReviewerRated 5 out of 5 stars3 months agoSunroof
Looks great. Is the sunroof still operational?
CPChief Products3 months agoYes. Sunroof is still fully functional! :)
Related Items
WK2 SUMP PROTECTION PLATE
$299.99 AUD
Chief Products WK2 Sump Protection Plate provides critical off-road protection for the underside of your engine. It's made from High-Strength Steel and features a rolled front lip design that is braced against the frame for maximum strength. It delivers recessed rear mounting bolts (impossible to hit off-road) and Slotted Bolt Head Protectors (to protect the front mounting bolts). For serious off-roaders, we're the only company in the world offering a Heavy Duty version (270% stronger than Standard). For WK2 owners with a 5.7L V8, we're the first in the world to offer an Access Panel version for easy servicing of your 5.7L. Best of all, we now offer a Bare Bones Edition at a great price, without sacrificing any of the top-notch quality Chief Products is known for.
-
Chief Products WK2 Sump Protection Plate provides critical off-road protection for the underside of your engine. It's made from High-Strength Steel and features a rolled front lip design that is braced against the frame for maximum strength. It delivers recessed rear mounting bolts (impossible to hit off-road) and Slotted Bolt Head Protectors (to protect the front mounting bolts). For serious off-roaders, we're the only company in the world offering a Heavy Duty version (270% stronger than Standard). For WK2 owners with a 5.7L V8, we're the first company in the world to offer an Access Panel version for easy servicing of the 5.7L. Best of all, we now offer a Bare Bones Edition at a great price, without sacrificing any of the top-notch quality Chief Products is known for.
FEATURESHIGH-STRENGTH STEEL (High Strength To Weight Ratio)SLOTTED BOLT HEAD PROTECTORS (6061 Aluminium)RECESSED REAR MOUNTING BOLTS (Smooth Undercarriage)DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)E-COAT (Industry Leading Corrosion Protection)DRAINAGE SLOTSEASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS10.9kg INSTALLED WEIGHT --> Standard 12.2kg INSTALLED WEIGHT --> Access Panel 17.9kg INSTALLED WEIGHT --> Heavy Duty 10.8kg INSTALLED WEIGHT --> Bare Bones Edition INCLUDESSTANDARD1 Sump Protection Plate - Standard (3mm high-strength steel) 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 50mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 20mm (4.6) Bolts (Zinc Plated) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M8 x 32mm Washers (Zinc Plated) 2 M8 Nyloc Nuts (Zinc Plated) 2 M8 x 3mm Bushings (Aluminium) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions HEAVY DUTY1 Sump Protection Plate - Heavy Duty (5mm high-strength steel) 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 50mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 20mm (4.6) Bolts (Zinc Plated) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M8 x 32mm Washers (Zinc Plated) 2 M8 Nyloc Nuts (Zinc Plated) 2 M8 x 3mm Bushings (Aluminium) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions ACCESS PANEL1 Sump Protection Plate - Access Panel (3mm high-strength steel) 1 Access Panel (3mm high-strength steel) 4 M6 Chief Products Bolt Head Protectors - Standard (Aluminium 5083) 4 M6 x 25mm High Tensile (10.9) Bolts (Zinc Plated) 4 M6 Chief Products Bolt Head Protectors - Slotted (Aluminium 5083) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 50mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 20mm (4.6) Bolts (Zinc Plated) 8 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M8 x 32mm Washers (Zinc Plated) 2 M8 Nyloc Nuts (Zinc Plated) 2 M8 x 3mm Bushings (Aluminium) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions BARE BONES EDITION1 Sump Protection Plate - Bare Bones Edition (3mm high-strength steel) 4 M6 x 40mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 50mm High Tensile (10.9) Bolts (Zinc Plated) 2 M8 x 20mm (4.6) Bolts (Zinc Plated) 4 M6 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M8 Wedge-Lock Extended Washers (Zinc Flake Coating) 4 M8 x 32mm Washers (Zinc Plated) 2 M8 Nyloc Nuts (Zinc Plated) 2 M8 x 3mm Bushings (Aluminium) 4 M6 Nutserts (Stainless Steel) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONS -
High-StrengthAll versions are made from High-Strength Steel and feature a rolled front lip design that is braced against the frame for maximum strength. For those wanting maximum strength we also offer a Heavy Duty version (270% stronger than our Standard version).
Simplified Bushing SystemOur simplified bushing system provides protection from creaking, while simplifying the install process to help reduce installation mistakes by service departments.
Compatible With Mopar Skid PlatesEngineered to integrate perfectly with the Mopar Front Axle Skid Plate. Whether your WK2 came from Jeep with the Off-Road Adventure Pack II or you decided to add the Mopar skid plates afterward, our WK2 Sump Protection Plate is designed to integrate perfectly and provide a smooth undercarriage.
Compatible With Our Entire Product LineAlready own our WK2 Lower Front Guard, WK2 Recovery Hooks, WK2 Recovery Points, WK2 Nudge Bar, WK2 Transmission Protection Plate, WK2 Hidden Winch Mount or WK2 Off-Road Front Bumper? We’ve designed the WK2 Sump Protection Plate to integrate perfectly with all of our products.
Ease Of UseOur Access Panel version makes it extremely easy to service your 5.7L V8 WK2.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Bolt Head ProtectionOur Bolt Head Protectors are engineered to keep critical bolt heads protected from off-road obstacles. They feature a slotted design that keys directly into the product with no possibility of spinning or moving when hit off-road.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting required. Replaces OEM/Mopar plastic 'Belly Pan, Front' (part# 68037063 - 68091772 - 55079191).WK2 Sump Protection Plate fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models. -
WK2 RECOVERY POINT
$178.99 AUD
Chief Products WK2 Recovery Point is the strongest & safest recovery attachment point available for your WK2. It features a large 55mm eyelet design that is extremely easy-to-use, while still being engineer certified to 4,500kg WLL, (8,000kg WLL when using pair with a bridle strap). The closed loop design provides the safety benefits of a 'Closed Recovery System'. The 5mm radius edges (ADR requirement) are a key feature that won't damage soft shackle recovery gear. Best of all, we include all the 'extras' (High-Tensile 10.9 Corrosion Resistant Fasteners, Heavy-Duty Strengthening Plates & Wedge-Lock Washers) needed to ensure this is a product you can trust when you need it most.
-
Chief Products WK2 Recovery Point is the strongest & safest recovery attachment point available for your WK2. It features a large 55mm eyelet design that is extremely easy-to-use, while still being engineer certified to 4,500kg WLL, (8,000kg WLL when using pair with a bridle strap). The closed loop design provides the safety benefits of a 'Closed Recovery System'. The 5mm radius edges (ADR requirement) are a key feature that won't damage soft shackle recovery gear. Best of all, we include all the 'extras' (High-Tensile 10.9 Corrosion Resistant Fasteners, Heavy-Duty Strengthening Plates & Wedge-Lock Washers) needed to ensure this is a product you can trust when you need it most.
FEATURESHIGH-STRENGTH STEEL (20mm)DURABLE POWDER COAT FINISH (Advanced Polyester Thermosetting Powder)E-COAT (Industry Leading Corrosion Protection)EASY INSTALLATION (Difficulty = 2/10)SPECIFICATIONS4,500kg SINGULAR --> WORKING LOAD LIMIT [Engineer Certified] 8,000kg PAIR --> WORKING LOAD LIMIT [Engineer Certified] (using bridle strap) 4.58kg INSTALLED WEIGHT --> SINGULAR 9.16kg INSTALLED WEIGHT --> PAIR 55mm EYELET INCLUDESTEXTURED BLACK [SINGULAR]1 Recovery Point 1 Mounting Plate (Aluminium 5083) 1 Strengthening Plate (Aluminium 5083) 2 M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated) 1 M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 1 4g pouch Anti-Seize 1 Installation Instructions TEXTURED BLACK [PAIR]2 Recovery Points 2 Mounting Plates (Aluminium 5083) 2 Strengthening Plates (Aluminium 5083) 4 M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated) 2 M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 4g pouches Anti-Seize 1 Installation Instructions FLAME RED [SINGULAR]1 Recovery Point 1 Mounting Plate (Aluminium 5083) 1 Strengthening Plate (Aluminium 5083) 2 M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated) 1 M10 x 65mm High Tensile (10.9) Bolt (Zinc Plated) 4 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 1 4g pouch Anti-Seize 1 Installation Instructions FLAME RED [PAIR]2 Recovery Points 2 Mounting Plates (Aluminium 5083) 2 Strengthening Plates (Aluminium 5083) 4 M10 x 90mm High Tensile (10.9) Bolts (Zinc Plated) 2 M10 x 65mm High Tensile (10.9) Bolts (Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 4g pouches Anti-Seize 1 Installation Instructions OPTIONS* WARNING *
DO NOT EXCEED THE WORKING LOAD LIMIT OF THIS PRODUCT AT ANY TIME. The Working Load Limit of this product is significantly less for non-straight line pull forces.
* CAUTION *
Every recovery situation has the potential for personal injury. In order to minimise that risk, it is important to familiarise yourself with the proper operation of your recovery equipment before using it, and be constantly safety oriented. -
High StrengthEngineer rated to 4,500kg WLL (1.5 times GVM of WK2). 1.5 times GVM is considered the engineering minimum standard for recovery points. A 3,000kg GVM vehicle stuck in deep mud/sand needs a high-strength recovery point to safely withstand the forces encountered during recovery. Our engineer rating jumps to 8,000kg when our recovery points are used as a pair with a bridle strap.
Winch CompatibilityIf you're installing a winch (or plan to be recovered by one) you'll want a recovery attachment point that is up to the task. For a 10,000lb winch you'll want a recovery attachment point with a minimum WLL of 4,500kg.
SafetyIn addition to the engineer rated design, our recovery point also features a 5mm radius on all exposed edges. This ensures safe use with soft shackle recovery gear, while also meeting the required government safety standards (Australian Design Rules as well as various European Pedestrian Safety Standards). The closed loop design delivers a 'Closed Recovery System' ensuring recovery gear won't fall off during recovery. Finally, while our recovery point protrudes through the opening in the lower fascia for easy attachment of recovery gear, it doesn't extend beyond the front most part of the bumper.
Ease Of UseThe large 55mm eyelet makes attachment of recovery gear extremely easy. The closed loop design ensures recovery gear won't fall off during recovery. The recovery point protrudes far enough beyond the lower fascia to ensure side recoveries are easily possible.
CompatibilityEngineered to be 100% compatible with all of our products, as well as all of your Jeep's safety systems. Designed so they can be easily installed on either side of the vehicle (Drivers or Passengers).
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they're reversible, to make things as easy as possible.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
ColourAvailable in several colours, so you can choose which one looks best on your machine.
Attention To DetailMachined edges, smooth surfaces and precision alignment.
Real World TestingThere aren’t many off-road companies who own a WK2 as their daily driver, or regularly take it all over Australia in search of off-road adventures. In our opinion, that extra testing and passionate attention to performance leads to superior products.
Top Quality Finishing TouchesWe include all the details that matter. High tensile zinc plated bolts for maximum strength and corrosion resistance. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting needed. Some models require cutting holes for access to the points, (see notes below).WK2 Recovery Point fits DRIVER & PASSENGER sides of the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.** Fitment on most Australian 2016+ models requires cutting (2) holes in the grille area of the lower front fascia. These models no longer provide holes for access to the points.*** Fitment on Summit, High Altitude, SRT & Trackhawk (including all models with same lower front bumper/fascia) requires cutting (2) holes in the grille area of the lower front fascia. Instructions are not currently provided for this modification.Fitment confirmed with the following products:WK2 Recovery Point does NOT fit with the following products:ARB Bull BarECB Bull BarUneek Bull BarIronman Bull BarRocky Road Outfitters PrerunnerRocky Road Outfitters Bumper/Brush Bar/Winch Mount ComboINSTALLATION INSTRUCTIONS -
![WK2 Nudge Bar [MOUNTING ARMS ONLY]](http://www.chiefproducts.com.au/cdn/shop/products/WK2-Nudge-Bar-VARIANT-Mounting-Arms-Only-screen.jpg?v=1572498491)
WK2 NUDGE BAR
$389.99 AUD
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
-
Chief Products WK2 Nudge Bar provides a great looking bar with clean simple lines and an impressive collection of exclusive features. It's made from 304 Stainless Steel (excellent corrosion and scratch resistance) and features a specially engineered mounting system (built from 20mm high-strength steel) that provides maximum strength without reducing your approach angle. It includes a slotted accessory mounting tab that runs the entire length of the bar (making it extremely easy to mount your accessories). Best of all, we've created a bar that is compatible with the all of your Jeep's safety systems - air bags, adaptive cruise control, forward collision warning, lane departure warning and parking sensors*.
FEATURES304 Stainless Steel (Excellent Corrosion & Scratch Resistance)Bar = Mirror Polished or Durable Powder Coat FinishMounting Arms = E-Coat + Durable Powder Coat FinishEasy Installation (Difficulty = 2/10)SPECIFICATIONS10.6kg Fully Installed Weight (Including Mounting Hardware) 63.5mm Bar Diameter 629mm Mounting Tab Total Length (24.76 inches) 599mm Mounting Tab Slot Length (23.58 inches) 123 Brinell Hardness (Excellent Scratch Resistance) 29.4˚ Approach Angle (lower front fascia removed + standard suspension) 33.3˚ Approach Angle (lower front fascia removed + air suspension OR2) Same As Stock Approach Angle (lower front fascia installed) INCLUDESGLOSS BLACK1 Gloss Black Bar (304 Stainless Steel) 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions MIRROR POLISHED1 Mirror Polished Bar (304 Stainless Steel) 2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions [MOUNTING ARMS ONLY]2 Chassis Mounting Arms 4 Chassis Mounting Plates 2 M10 x 60mm Heavy Duty Washers (Black EDP Coating) 4 M10 x 40mm High Tensile (10.9) Bolts (Black Zinc Plated) 4 M10 x 65mm High Tensile (10.9) Bolts (Black Zinc Plated) 8 M10 Wedge-Lock Extended Washers (Zinc Flake Coating) 2 M10 Nuts (Zinc Plated) 1 4g pouch Anti-Seize 1 Installation Instructions OPTIONSMORE INFO*Parking Sensor Compatibility - We provide 95% compatibility (read more). -
Excellent Approach AngleSince our design doesn't extend below the mounting brackets, the approach angle (an important aspect off-road) is significantly better than other nudge bars.
Parking Sensor CompatibilityThrough careful engineering & testing we've delivered a nudge bar that is 95% compatible with the parking sensors on all WK2 models.
High StrengthOur innovative mounting system uses steel tabs on the bottom of each bar to lock the bar securely to (2) 20mm high-strength steel mounting arms. This high-strength design means there will be minimal vibrations for your accessories when you're off-road.
Highly Scratch ResistantBy using 304 Stainless Steel (which has a higher hardness rating than Aluminium) we're able to provide a nudge bar with much better scratch & wear resistance.
Low Installed WeightOnly 10.6kg when fully installed. This is extremely light when compared to a Bull Bar which often weighs 40kgs (alloy) - 90kgs (steel).
Accommodates Numerous Lighting & Accessory OptionsThe accessory mounting tab is slotted across its entire length, allowing you to install lights or accessories however you choose.
Contoured To FitThe accessory mounting tab is contoured to match the curvature of the WK2 grille, so it integrates perfectly with the front of the WK2.
Compatible With Front Recovery PointsCan be installed with Chief Products WK2 Recovery Hooks & WK2 Recovery Points, (which can be installed on driver & passenger sides and are engineer rated to 4,500kg). Due to mounting restrictions, many nudge bars don't allow you to install any front recovery points with their bar.
Compatible With Adaptive Cruise ControlThrough careful engineering & testing we've delivered a nudge bar that is compatible with the adaptive cruise control system on all WK2 models.
Guards Against Damage During RecoveryThe mounting brackets are designed to stop recovery straps or bow shackles from hitting the bar during an off-road recovery.
Easy To InstallWe provide easy-to-follow step-by-step instructions. If you're half-way decent with a wrench you can easily install this yourself. We've even designed the mounting brackets so they swivel slightly during installation to make things as easy as possible.
Industry Leading Corrosion ProtectionWe utilise E-Coat (Electrophoretic Coating) to provide the very highest corrosion protection available for steel automotive parts. Deposited from a water-based solution using a high voltage DC charge, the process coats all wet surfaces with an extremely tough and highly corrosion resistant finish that is unlike any other process. On top of that industry-leading electrophoretic coating we apply 80µm of extremely durable powder coat (advanced polyester thermosetting powder). Finally, whenever possible we build our products with highly corrosion resistant materials and fasteners (stainless steel, aluminium alloys, etc.) to provide enduring protection against corrosion when a coating is scratched or damaged off-road.
Mirror Polish That LastsOur mirror polished 304 Stainless Steel keeps looking good for longer. Polished aluminium bars tend to develop a white haze from oxidation that causes them to lose their lustre.
Top Quality Finishing TouchesWe include all the details that matter. Electrophoretic Coating on all mounting plates. High tensile bolts for maximum strength. Wedge-Lock washers to create bolted joints that are extremely resistant to loosening. Anti-Seize for bolted joints that are resistant to seizing. A Chief Products Shop Rag for all the dirty jobs around the garage. All packaged with extreme care to arrive safely and looking great. -
Bolts into existing mounting points in the frame, no drilling or cutting needed. Some models require cutting holes for the Mounting Brackets, (see notes below).WK2 Nudge Bar fits the following vehicles:2011 Jeep Grand Cherokee - All Models & Limited Editions2012 Jeep Grand Cherokee - All Models & Limited Editions2013 Jeep Grand Cherokee - All Models & Limited Editions2014 Jeep Grand Cherokee - All Models & Limited Editions2015 Jeep Grand Cherokee - All Models & Limited Editions2016 Jeep Grand Cherokee - All Models & Limited Editions2017 Jeep Grand Cherokee - All Models & Limited Editions2018 Jeep Grand Cherokee - All Models & Limited Editions2019 Jeep Grand Cherokee - All Models & Limited Editions2020 Jeep Grand Cherokee - All Models & Limited Editions2021 Jeep Grand Cherokee - All Models & Limited Editions
* Fits USA & Export models.** Fitment on most 2016+ Australian & European models requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets to pass through. Instructions are not currently provided for this modification.*** Fitment on Summit, High Altitude, SRT & Trackhawk (including all models with same lower front fascia) requires cutting (2) holes in the grille area of the lower front fascia for the Mounting Brackets. Instructions are not currently provided for this modification.Fitment confirmed with the following products:Does NOT fit with the following products:OEM Tow Hooks (part# 82212095)Jeep Australia Tow Hook (part# CH8220WKRH or AUSWK14HOOK)INSTALLATION INSTRUCTIONS
